The short answer
For DW-BS003, keep three measurements separate: 218 × 64 × 18 cm open, 123 × 64 × 22 cm separated and 135 × 66 × 31 cm packed. Use the measurement for the configuration you will actually receive or store. Do not halve the open length to estimate the separated size, and do not treat packing dimensions as a verified carry-case specification.
A two-part basket stretcher can reduce the length of equipment in storage, but the words “split” or “separable” do not define its final storage envelope. Saudi purchasing teams need the exact configuration for the receiving point, equipment room or vehicle compartment. This guide reads the three DW-BS003 catalogue measurements and identifies the remaining questions before a quotation is accepted.
Match each dimension to the right configuration
The catalogue describes DW-BS003 as a basket stretcher that separates into two parts. Its three dimension fields are not interchangeable. Keep length, width and height together when comparing a supplier reply with your available space.
| Catalogue field | Listed size (L × W × H) | What to confirm |
|---|---|---|
| Open | 218 × 64 × 18 cm | The complete assembled equipment envelope |
| Separated | 123 × 64 × 22 cm | The exact arrangement represented by this measurement |
| Packing | 135 × 66 × 31 cm | The final outer package for the quoted order |
Sources: DW-BS003 catalogue dimensions, package quantity and qualification notes
Why two parts do not mean a 109 cm stored length
Half of the listed 218 cm open length is 109 cm, but the catalogue gives 123 cm for the separated configuration. Use the stated 123 cm figure for preliminary comparison, then request confirmation of the arrangement measured. The catalogue does not explain the geometry well enough to derive a different size or assume that both sections are identical.
The width remains 64 cm in the open and separated fields, while the listed height changes from 18 to 22 cm. A shorter length therefore does not mean every dimension becomes smaller. A shelf that is long enough may still be too shallow or too low.
Different models also arrange their parts differently. Ferno’s official 71-S page explicitly describes nested halves and lists a different optional carry-bag code from its one-piece model. That is a useful example of the detail to request. It does not establish nesting, a matching bag or Ferno compatibility for DW-BS003.
Sources: DW-BS003 catalogue dimensions, package quantity and qualification notes · Ferno 71 and 71-S: model-specific nesting and optional bag identification
Packing size is not a promise of carry-case fit
The DW-BS003 catalogue lists one unit per package and packing dimensions of 135 × 66 × 31 cm. This is a shipping field. It does not verify a reusable case, a protective bag or the dimensions of equipment with all requested accessories attached.
If your team needs a case, request its exact reference, internal and external dimensions and the equipment configuration it accepts. Ask whether the quoted package includes it or lists it separately. A photograph of a basket beside a bag does not establish the offered contents.
For the delivery plan, request the final package count and outer dimensions after any additional packing is agreed. Material and net/gross weights conflict in the source catalogue, so ask for confirmed figures instead of calculating freight from an unverified weight.
Sources: DW-BS003 catalogue dimensions, package quantity and qualification notes
Record the stored arrangement and the access route
Tell the supplier whether you plan to keep the stretcher assembled, separated, in its shipping package or in a requested case. Record the clear opening and usable internal dimensions of the actual storage location. Include handles, door hardware or other obstructions when describing the available space; the catalogue does not provide a guaranteed clearance allowance.
Ask which components stay with the basket in that arrangement and how the supplied manufacturer instructions describe storage and reassembly checks. Do not use a dimensional comparison as an assembly procedure or an approval for rescue use. Lifting accessories and their documentation remain a separate purchasing question covered in our basket-accessory guide.
Sources: Basket stretcher restraint and lifting-accessory buying guide
Send a configuration-specific Saudi enquiry
For a Saudi order, give the actual delivery city and facility, quantity, receiving constraints and intended stored configuration. For a multi-site order, retain those details per location rather than assuming every equipment room or vehicle compartment is the same.
A useful request is: “Please quote DW-BS003, [quantity], for [facility and city]. Confirm the 123 × 64 × 22 cm separated configuration, provide a photo or drawing of the measured arrangement, and confirm final package dimensions, contents and weights. Our storage opening and internal space are [dimensions]. Confirm any proposed case separately.”
Add the basket stretcher to your quote list, select Saudi Arabia and include those requirements. The team can address the actual order; the catalogue alone does not guarantee storage fit, availability or delivery timing.
Sources: DW-BS003 catalogue dimensions, package quantity and qualification notes · Saudi Arabia equipment enquiries · Saudi multi-site order allocation guide
Buyer questions, answered
Does the separated DW-BS003 measure exactly half its open length?
No. Its listed open length is 218 cm and its separated length is 123 cm. Do not replace the catalogue figure with 109 cm; confirm the exact separated arrangement with the supplier.
Does the basket become narrower when separated?
The catalogue lists 64 cm width in both configurations. The listed height increases from 18 cm open to 22 cm separated, so compare all three measurements.
Is 135 × 66 × 31 cm the size of an included carry case?
That is the catalogue packing size, not a verified reusable case specification. Request the case reference, dimensions and inclusion status separately if a case is required.
Do these dimensions confirm lifting or vehicle-mount compatibility?
No. Dimensions describe size. Lifting, restraint, mounting and operating requirements need separate documentation for the exact supplied equipment and accessories.
Product details and references
- DW-BS003 catalogue dimensions, package quantity and qualification notes
- Ferno 71 and 71-S: model-specific nesting and optional bag identification
- Basket stretcher restraint and lifting-accessory buying guide
- Saudi Arabia equipment enquiries
- Saudi multi-site order allocation guide
Prepared with AI assistance using the referenced information. Original diagrams illustrate purchasing checks, not clinical procedures. Confirm specifications and suitability with the supplier and your responsible equipment team before ordering.